Product introduction:
The low frequency pulse square wave injection method can reliably and accurately monitor the insulation resistance of AC, DC and AC/DC hybrid IT system (ungrounded system) to ground. Due to various applications, system types, operating conditions, applications of variable speed drives, high system leakage capacitance, etc., the measurement technology must be able to meet different requirements to ensure optimal response time and relative uncertainty. Different measurement conditions that can be selected from the setting menu allow the optimization and adaptation of measurement technology for special applications
Product parameters are as follows:
Power supply 85V-265VAC, 50Hz, 9-36VDC
Rated power is about 5W
Equipment weight≤ 0.6Kg
Mechanical size 135 * 89
Ambient temperature - 20 ℃~60 ℃
Ambient humidity Relative humidity< 95%
Rated insulation voltage 800VAC
Rated impulse voltage 8kV
Pollution level 3
Alarm 1 response value 1k&Omega~ 10MΩ
Alarm 2 response value 1k&Omega~ 10MΩ
Relative instability ± 20%
Hysteresis (1~10kΩ)± 2kΩ
Hysteresis (10kΩ~10MΩ) 25%
Current/voltage output 4mA~20mA (≤ 500Ω)/0-10V
Current output accuracy (1k~1MΩ) ± 10%,± 1kΩ
Measuring voltage≤ 48V
Measuring current≤ 220 μ A
DC internal resistance≥ 600kΩ
AC impedance≥ 600kΩ
Electrical life 12000 times
The product dimension diagram is as follows:
The product connecting line is as follows:
Product application:
The products are applicable to other industries such as mine, petrochemical industry, steel plant, cruise ship, etc.
mine
petrochemical industry
steel mill
Cruise
